Gateway Industriale 4G VPN

  • Supporto per la connessione 4G LTE con velocità di download fino a 150 Mbps e velocità di upload fino a 50 Mbps
  • Connessione dual-SIM per garantire una connessione continua in caso di interruzione del servizio da parte di un operatore
  • Diverse funzionalità di sicurezza, tra cui la crittografia WPA/WPA2, la VPN, la gestione degli accessi basati su MAC e l’accesso protetto alla rete tramite autenticazione a due fattori
  • Progettato per funzionare in ambienti difficili, con un intervallo di temperatura di -40°C a 75°C e resistenza alle vibrazioni fino a 5G.

COD: EBI5737 Categoria:

Descrizione

Il router industriale 4G VPN è un dispositivo di rete robusto e affidabile progettato per l’uso in ambienti industriali.

Il router supporta le connessioni 4G LTE e offre velocità di download fino a 150 Mbps e velocità di upload fino a 50 Mbps. Inoltre, il dispositivo è in grado di supportare la connessione dual-SIM per garantire una connessione continua in caso di interruzione del servizio da parte di un operatore.

Il router è dotato di diverse funzionalità di sicurezza, tra cui la crittografia WPA/WPA2, la VPN, la gestione degli accessi basati su MAC e l’accesso protetto alla rete tramite autenticazione a due fattori.

Inoltre, è stato progettato per funzionare in ambienti difficili, come ad esempio quelli caratterizzati da temperature estreme, umidità elevata e vibrazioni. Il router è in grado di funzionare in un intervallo di temperatura compreso tra -40°C e 75°C e di resistere a vibrazioni fino a 5G.

  •  CONTROLLO INDUSTRIALE
  •  DOMOTICA
  •  MAGAZZINO E LOGISTICA

Specifiche tecniche

Cellular

Interface

Antenna

2 x SMA-K

Note: North America models: 2 x SMA 4G antenna connectors.

SIM card1 x (3 V & 1.8 V) Standard 2FF SIM, drawer-type sim card slots
Ethernet1 x WAN port 10/100 Mbps, compliance with IEEE 802.3, supports auto MDI/MDIX,1.5KV network isolation transformer protection

4 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto

MDI/MDIX,1.5KV network isolation transformer protection

IndicatorsLED

PWR: red,always on after powered on

Work: green,blinking when the router is ready and working properly WLAN: green,always solid on when WiFi is enabled and working properly USR:user defined.

Net indicator:

Red always on after connected to 2G network

Green always on after connected to 3G network

Orange always on after connected to 4G network

Signal strength:3 solid bars,strongest signal

Terminal blockPinout

V+,V- : 2 cores terminal power supply socket,built-in power supply phase-reversal protection

GND: ground terminal

Tx/B:RS-232/RS485 pin(setup by software)

Rx/A:RS-232/RS485 pin(setup by software)

DI:2 x Digital input,passive switch

DO:2 x Digital open collector output, max output 36 V, 300 mA

COM: common terminal,use in conjunction with DOs

WiFi InterfaceStandards & FrequencyIEEE 802.11b/g/n,2.4GHz, AP mode
Data speedIEEE 802.11b/g,maximum 54Mbps.IEEE 802.11n,maximum 150Mbps
Antenna2 x RP-SMA-K
Transmission distance80 meters by line of sight.Actual transmission distance depends on environment of the site.
Power SupplyAdaptorDC 12V/1A
ConnectorDC Power Jack Barrel Type Female 5.5*2.1mm Round socket or industrial terminal block,reverse polarity protection
Input voltageDC 9~36V
Working powerAverage 522mA/12V, Maximum 811mA/12V
Serial InterfaceRS485/RS232(alternative)

industrial terminal block.

Note:RS232 default.

Baud rate(bps)1200,2400,4800,9600,19200,38400,57600,115200,230400
Data bits8
Stop bits1,2
ParityNONE,ODD,EVEN

Physical

Characteristics

HousingMetal shell,IP30
Dimensions125.0*103.0*45.0mm (L*W*H,antenna pedestal,terminal block and DIN Rail are not included)
Installation methodEar mounting, DIN-Rail mounting
EMC

Static IEC61000-4-2, level 3

Pulsed Electric Field IEC61000-4-4, level 3

Surge IEC61000-4-5, level 3

Operating temperature-20℃~+70℃
Storage temperature-40℃~+125℃
Operating humidity5%~95%RH(non-condensing)
OthersReloadPinhole button,restore factory defaults/firmware resume/firmware upgrading with USB
TBDDebug interface (TTL Level)
USBFirmware upgrading
TFTF card slot
Ground protectionScrew
Embedded WatchdogDevice runs self-detection, auto recovers from malfunctions
CertificateCE

Network

Connection

WAN protocolPPP, PPPoE, DHCP client
LAN protocolARP, DHCP server, NAT,VLAN
4G network access

Auto APN/VPDN, private network

Access authentication: CHAP/PAP

WLAN security

Open system,WPA/WPA2 PSK

TKIP/AES encryption

IP routingStatic routing
Network diagnosisPing,route trace,DNS
Serial modemWork modeNET,HTTPD
Sockets4 sockets,4centers ,TCPS(SOCKA)/TCPC/UDPS/UDPC
Modbus RTU to TCPSupport
DI/DOEventsSMS, EMAIL
Device managementConfigurationWeb
Remote managementSSH, AT command,SNMP,SMS
PUSR platformRemote monitoring,remote upgrade,alarming,base station location,remote access to web pages of the router
SecurityFailover backupFailover between 4G and WAN, ensures automatic switch to alternative backup connection
Firewall

DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping,

Access Control

VPNSupports PPTP, L2TP, GRE, IPSEC VPN (IKEv1), OPENVPN protocols
ServiceDDNSRemote access the device through domain name
AlarmEmail,SMS,DO
Others

NTP client

Timing task

USB firmware upgrade

User defined indicator

Plugin WordPress Cookie di Real Cookie Banner